Bright condo being prepared for handover

Laval condo turnover cleaning

Condo post-construction cleaning in Laval

Nickel & Krome handles the main post-construction clean for condo and rental buildings in Laval: dust removal inside units, accessible surface cleaning and the shared circulation areas included in the scope. Work is coordinated with the contractor by building, floor or group of units released by the trades.

Start estimate Talk to the team

Nickel & KromeCare in every detail.

Area: Laval
Scope: Units and circulation
Stage: Main cleaning

Direct answer

Condo post-construction cleaning in Laval is the main cleaning of units and agreed circulation areas after dust-producing work ends. The scope separates construction dust and residue, active work zones and released batches. A later pre-delivery pass separately handles visible touch-ups before keys are handed over.

Main cleaning by released unit, floor or batch
Quote inputs: Laval address, units, surfaces, remaining work, access and schedule

Main cleaning of agreed units and circulation areas, by released batch in Laval.

What this service covers.

This stage removes construction soil before occupancy. The unit list, surface materials and actual site condition define the work; presentation touch-ups close to key handover are planned as a separate finishing stage.

Related services

Find the service, location, or request page that best matches your project.

Condo cleaning hub→Laval pre-delivery cleaning→Condo delivery guide→Estimate request→

Service details

The main clean inside units and along shared access routes

After dusty trades finish, deposits can remain on shelves, hardware, cabinetry and floors. The cleaning method follows the surface and its finish: adhesive residue, settled dust and a mark on a coating may require different treatment.

The quote separates work inside units from the lobbies, corridors and elevators used to reach them. Garages, exterior glazing and other spaces are listed separately so their inclusion is clear.

Covered scope

Dust accessible surfaces, baseboards, doors and shelves.
Clean kitchens, bathrooms, appliances and cabinetry according to the agreed list.
Assess removable marks and residue against the surface material.
Clean the designated floors and shared circulation areas.
Record inaccessible zones or spaces reopened by the trades.

Service details

Release one batch without resoiling completed units

Before each visit, the contractor identifies ready units, spaces still under construction and usable access routes. A corridor serving active work can carry dust back into a finished batch, so the sequence accounts for movement between suites and common areas.

At the end of a batch, outstanding cleaning is distinguished from damage or unfinished trade work. Further work may require another cleaning pass. Once the main clean is complete, Laval pre-delivery cleaning addresses visible details before a walkthrough or possession.

Covered scope

Before: confirm site condition, a representative unit and the surface list.
During: agree on unit order, equipment access and circulation to protect.
After: identify completed zones, access limitations and any later touch-ups.

Service details

Plan access to your Laval construction site

Provide the full site address and Laval sector, such as Chomedey, Laval-des-Rapides or Sainte-Dorothée. If the development spans several addresses, identify the service entrance and site contact for each building; the development name alone does not establish where equipment can enter.

Access is checked for your property: unloading position, usable elevator, distance from the vehicle to the units, water and electrical supply. Scheduling and mobilization are confirmed after reviewing these details and the remaining construction work.

Covered scope

Building list or plan showing addresses and service entrances.
Ready-unit counts by floor and approximate area by unit type.
Site contact who authorizes access and communicates phase changes.

Service details

What to include in a comparable quote request

Send recent photos of a representative unit and the common areas, the target date for each batch, and manufacturer care instructions for delicate finishes. Identify any remaining construction waste or protective coverings and who will remove them.

The scope should also specify the number of visits: the main clean, any return after further trade work and final pre-delivery touch-ups. This lets you compare proposals covering the same spaces and stages.

Covered scope

Unit count and area, including kitchens, bathrooms and glazing.
Plans or photos of the corridors, lobbies and elevators included.
Remaining trades, unit release dates and intended handover dates.
Observed residue, sensitive materials and required access.

Frequently asked questions

Common pre-quote questions

The answers below help frame the scope before you request a quote.

When should units be released for cleaning?

Units must be accessible and dusty work complete in the batch being cleaned. Other phases may continue if access routes and separation between zones protect completed spaces. The sequence is confirmed with the site contact.

Are common areas and parking included with the units?

They can be included in the same contract, but their area and condition are listed separately. A unit count alone does not establish the work required in lobbies, stairwells or parking areas.

Is one cleaning pass enough before keys are handed over?

The main clean removes dust and construction soil. Later inspections, corrections or traffic may require a separate pre-delivery touch-up near possession. The quote should specify the planned number of visits.

How are adhered residue and damaged surfaces handled?

The scope separates cleaning residue, waste removal and defects in the material. Any removal method that could damage a finish is assessed before use; scratches and repairs belong with the relevant trade.

Next step

Need a quote for your Laval condo project?

Send the site addresses, unit list, recent photos and release dates for each batch. We can then define the spaces, visits and access required for the post-construction clean.

(514) 974-3311 · info@nickelandkrome.ca

Request an estimate

Contact Nickel & Krome