Building lobby with stone and wood finishes

Montreal post-construction common areas

Post-construction common-area cleaning in Montreal

Nickel & Krome prepares lobbies, corridors, stairs, elevators, and shared access routes in Montreal residential projects before inspection or handover to the condo board. The service supports contractors, developers, and property managers delivering new or renovated common areas, sometimes one floor at a time.

Start estimate Talk to the team

Nickel & KromeCare in every detail.

Area: Montreal
Scope: Shared spaces
Stage: Handover after work

Direct answer

Common-area cleaning after construction in Montreal prepares agreed lobbies, corridors, stairs and other shared spaces after building work. Authorized access, elevators, circulation routes and active work zones determine the sequence with the building contact. Recurring upkeep in an occupied condominium is a separate service.

Post-construction handover of agreed shared spaces
Quote inputs: address, spaces, surfaces, residue, access and delivery phases

Montreal lobbies, corridors, elevators, and access zones cleaned to match unit delivery standards.

What this service covers.

The quote defines released zones, surfaces to clean, the order of visits, and any proposed touch-ups. Remaining work, temporary protection, and elevator reservations are identified before the cleaning sequence is agreed.

Related services

Find the service, location, or request page that best matches your project.

Recurring common-area cleaning→Montreal post-construction→Montreal condo-tower cleaning→Downtown condo-tower cleaning→Montreal pre-delivery→Estimate request→

Service details

Shared-space handover scope

Shared zones · Vertical access · Exclusions

The mandate addresses construction residue in shared spaces released for cleaning: finish dust, traffic marks, and accessible details. Materials, their condition, and manufacturer care instructions determine the agreed tasks. Responsibility for removing temporary protection is assigned before the visit.

Private units, parking, specialized glazing, and deficiency corrections remain separate when they require their own method, equipment, or calendar.

When handover also covers units, technical zones, or other project components, post-construction cleaning in Montreal covers the broader scope.

Covered scope

Lobbies, vestibules, corridors, landings, and stairwells
Elevator cabs, landing doors, sills, and accessible finishes
Mail areas, service access, and amenities released by the site
Documented exclusions for active or inaccessible zones

Service details

Montreal sequencing and recontamination control

Phases · Urban access · Touch-ups

A Montreal lobby may be released while upper floors still receive materials and trade traffic. Cleaning too early creates repeat work, while waiting without a sequence can affect inspection timing. The plan follows the zones actually released by the site.

For a Montreal building with controlled entry, planning includes key or card pickup, the equipment delivery window, and the elevator available to the team. If residents already use a lobby, the project contact also confirms the route that must remain open and when traffic can be restricted.

Covered scope

Floor-by-floor or zone-group scheduling
Elevator and circulation-route coordination
Touch-ups after the cause of recontamination is controlled
Work windows approved for the specific project

Service details

Inspection and handover limitations

Review · Limits · Documentation

A review after drying can identify residual marks, blocked areas, or items that belong to another trade rather than the cleaning scope. Reporting those observations does not replace the contractor's technical acceptance process.

A floor mark may be removable residue, a scratch, or a finish defect. The review distinguishes cleaning touch-ups from items for the contractor to assess. Protected surfaces and zones not yet released remain listed separately.

Covered scope

Dry review of lobbies, corridors, and landings
Notes on remaining protection, blocked rooms, and out-of-scope residue
Targeted photos when included in the mandate
Clear separation between cleaning and trade correction

Service details

Prepare a phased handover brief

Zone inventory · Phasing · Handover conditions

To compare quotes, use the same zone plan and target date. Square footage alone does not describe the number of stairwells, sensitive finishes, access detours, or visits that may be needed after other teams return.

If inspection is planned for Friday but an elevator still carries construction deliveries on Thursday, include that constraint in the request. The proposal can then distinguish initial cleaning, deferred zones, and a possible pre-inspection touch-up using the access times actually confirmed.

Covered scope

Project address, site contact, and person responsible for handover
Plan or list of entrances, floors, stairwells, elevators, and amenities to release
Approximate area, materials, photos, and temporary protection still in place
Release dates by zone, unfinished work, and expected trade traffic
Access windows, elevator reservations, inspection date, and expected reporting

Service details

Selecting recurring service after handover

After construction closes and the building becomes occupied, recurring common-area cleaning covers defined shared zones. A tower-wide maintenance program belongs to Montreal condo-tower cleaning.

For Ville-Marie properties shaped by security desks, access cards, loading reservations, and restricted service windows, see Downtown Montreal condo-tower cleaning. Recurring services are not automatically included in construction handover.

Frequently asked questions

Common pre-quote questions

The answers below help frame the scope before you request a quote.

Which common areas can be prepared for handover?

Lobbies, corridors, landings, stairs, elevators, service access, and amenities can be included once released by the site team. Surfaces and exclusions are confirmed in the quote; private units require a separate scope.

Can one floor be cleaned while work continues elsewhere?

The plan separates released zones from those still used by trades. If teams cross an area that has already been cleaned, their route and any possible touch-ups must be agreed with the project contact before handover.

Who removes temporary protection before cleaning?

The person responsible for removal and the release date are confirmed before the visit. Cleaning underneath remaining protection cannot be checked until the surface is accessible; any later pass needs to be included in the sequence.

Does the cleaning review replace building acceptance?

The review covers agreed cleaning tasks and observed limitations. It does not replace the contractor's inspection, deficiency corrections, or permission to occupy the building.

Is underground parking automatically included?

No. Parking is assessed separately when it needs mechanical sweeping, washing, water control, or drain coordination.

Is recurring cleaning after residents arrive included?

Construction handover is a project-based mandate tied to the work and delivery dates. Recurring cleaning in an occupied building is arranged separately with its own zones, frequencies, and quality checks.

Next step

Need a Montreal common-area handover scope?

Send the address, zone plan, materials, release and inspection dates, access instructions, and unfinished work. Photos or a site visit may complete the assessment. The quote confirms availability, visit order, exclusions, and expected control points.

Request an estimate

Contact Nickel & Krome